6 Random Orbit Air Sanders
Air consumption: 8cfm
Non-load rotation: 10000 rpm
Orbit dia: 3/16"
1.Long time working without fatigue
2.Fast sanding speed and high working efficiency
4.Ergonomic design for increase comfort and convenient level.
5.High rotation speed
- 6" Air Sanders
- 6" pneumatic Sanders
- sander tools, A built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
- Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
- Different type of sandpaper can be installed with the different type of disc.
Professional Air Random Orbital Palm Sander, Dual Action Pneumatic Sander, Low Vibration, Heavy Duty
New version, high strength, wear resistant, long service life
Air Random Orbital Sander
It is made of a composite plastic body and is pretty light weight.
It is best used for all kinds of metal products, polishing processing of residual after welding slag, weld and rust.
Make sure you use the lubricating oil that comes with this for best performance.
Air Pressure: 90 PSI
hook and loop sanding pad:5"
Average air consumption: 10.5 CFM
Free speed: 12,000 RPM
Constructed with heat treated steel components for long life
Comfort Platform provides additional hand and wrist support.
Great sander, light weight, inexpensive, works great
- New version, high strength, wear resistant, long service life
- Air Inlet:1/4", hook and loop sanding pad:5", Free speed: 12,000 revolutions per minute
- Rear exhaust. Built-in regulator for speed control
- Lighter air-motor assembly, ideal for vertical and overhead sanding applications
- Average air consumption: 10.5 CFM;Air Pressure: 90 PSI
FIXKIT Air Random Orbital Sander (Air sander)
Warm Tips: Air sander
Before use, you should check the grinding wheel to ensure there is no flaw on the protective cover.
When orbital random sander need to replace the wheel, you should close the valve first, and then replace the wheel appropriately, make sure not be too tight or too loose.
After project work, close the pipe valve first, then the grinder, pressure relief, and last remove the grinder switch.
Grinding wheel should be kept dry and can not be stored in humid or open-air place.(NOTE: our sander can not be used for wet grinding, if needed, please purchase the specialized water mill tools. )
Specifications: Pneumatic orbit polisher
Item Material: Aluminum Alloy Plastic
Sanding Pad: 6 - Inch (150mm)
Free Speed: 10000RPM
Max Pressure: 90PSI3.28
Dimentions: 5.9 * H3.9inch ( 150*H100mm)
Air Consumption: 350L / MIN
Pendulum Diameter: 1/4"
Outlet Hose Diameter: 0.78inch
Working Pressure: 6.3bar
Hose Length: 3.28ft (1m)
Noise Value: 100db
Item Weight: 2.6 Pound
1 x Mini Dual Action Air Sander
1 x Trachea Quick Connector
1 x Wrench
7 x 240 # Sandpaper
1 x Hose
1 x Dust Bag
1 x User Manual
- PROFESSIONAL PNEUMATIC SANDER: New version, 6" Air Random Orbital Sander is easy to handle in palm; Comes with 7 pieces of 240 # sandpaper, wear resistant, you can start your grinding work confidently no matter what.
- STABLE PERFORMANCE: Built-in regulator for speed control of 10000 rpm per minute, our air tool sander will be your good helper for long lasting service in different operation area.
- DUST SUCTION SYSTEM: No more heavy dust with this handy air sander vacuum. Exhaust emissions to make siphon effects, and self-absorb the bottom debris to suction hose, so much healthier not to fight the dust from your face.
- APPLICATIONS: This dual action sander is ideal for the car body, furniture, metal products and other components, widely used for rough grinding, semi-fine grinding, grinding and grooving and cutting, etc.
- ERGONOMIC DESIGN: Ergonomically designed for counterweight, by reducing vibration for decreased user fatigue. Anyone can be your captain of your home Improvement. No hesitate, just add it to your cart!
DEWALT DWMT70781L Palm Sander
The dewalt swmt70781l Palm Sander features a lightweight, compact design with a touch control trigger for easy user control. This sander has a composite body design with a cushion grip housing cover allowing for a secure palm grip and tool protection for a long life. This unit operates with a 1/4\" air inlet and runs at 12,000 RPM. Designed stick on pads It is backed by dewalt's 3 year limited manufacturers warranty.
- Composite body design
- Cushion grip housing cover
- Touch control trigger
- 1/4" Air inlet
Ingersoll-Rand IR-4152 Composite 6-Inch Orbital Palm Pnuematic Sander with Pressure Sensative Adhesive Pad
This Ingersoll Rand vacuum-ready random orbital air sander combines a variety of great features and a great price to set a new standard in automotive finish work.
- Durable, light weight composit design
- Ultra-high quality fine sanding finish
- Interchangeable grip rings to match hand size
- Low Virbration
- 12,000 rpm free speed for swirl-free fishes
Hutchins 4500 6-Inch DA Super Sander
Over-size Drive Head eliminates pad-wobble RPM: 10,000 Wt: 3-1/3 lbs. Air Consumption: 9.8 cfm @ 90 psi Noise Level: 79 dBa 6" PSA Pad Does not include handle
- Over-size drive head eliminates pad-wobble for full contact sanding.
- Positive-action drive supported by 4-special bearings generates more power on less air.
Valianto 6" Professional Air Random Orbital Palm Sander with 1pc 6" Backup Plate, Heavy Duty Dual Action Pneumatic Sander Silver
Air Pressure: 90 PSI
Air Consumption: 4 CFM
Free Speed: 12000 r.p.m
Sander type: Non-vacuum
Colour: Red / Green / Silver
Air Hose ID: 3/8", Air Inlet:1/4''
Two Size Sanding Pad Available(5'', 6'')
What's in the Box:
1*6" Sanding Pads
1*Air Dual Action Random Orbital Sander
About Pneumatic Sanders:
Pneumatic sanders are also called air sanders and run on power generated by an air compressor. Non-vacuum models such as these are not connected to a vacuum system and are used in applications where dust extraction is not a concern.
Using Your Pneumatic Sander:
This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air, the point where the air hose is connected to the tool, when the tool is running with the level fully depressed
Why Choose Valianto's Random Orbital Sander?
Valianto random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action (D/A) palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish. Applied to Construction, Automobile and other fabrication, Manufacuring and repair industries, Mold industry, Woodworking and furniture manufacuring
- Packaging Includes-----1Pcs 6" Hook & Loop Sanding Pads (5/16 x 24 thread) / 1Pcs 6" Air Sander/ 1Pcs wrench/ 1Pcs Quick Connector/ Instruction manual
- Controllable Speed and High Efficiency-----Built-in regulator for speed control, easy to handle and Can be operated with one hand, highly reduce operators' fatigue while delivering the best performance, igh Speed and Powerful, universal sanding machine, Free speed Can reach 12,000 revolutions per minute, 90 PSI Air Pressure, high strength shorten your working time improve efficiency
- Double Rotation Polishing Technology-----Double rotation grinding method to make the polishing effect more uniform and smooth
- Low Vibration-----Valianto's Dual Action Pneumatic Sande, Light weight, low height, Precision balanced motor operates smoothly for greater comfort and control, reduce vibration, provide excellent performance
- VARIED APPLICATIONS-----This dual action sander is ideal for auto body, furniture,wood, metal products, widely used for sanding, grinding, polishing and waxing and cutting, etc.
TCP Global Brand 6" Dual Action D.A. Sander With Pad, Air Powered, (1/4" NPT)
Features: Heavy Duty Ball Bearing Construction for Vibration Free Performance Professional Sander with Unique Ergonomic Design Low Vibration for Swirl-Free Finishes Built-in Regulator for Complete Speed Control Constructed with Heat Treated Steel Components for Long Life Rear Exhaust with muffling system reduces sound level Includes Coupler Plug, Lubricating Oil, Wrench and Instruction Manual Specifications: Includes both a 6" PSA (Pre Stuck Adhesive) Backing Pad Free Speed: 10,000 rpm Air Consumption: 3.8 cfm (1081 l/min) Operating Pressure: 90 psi (6.3 bar) Air Inlet Size: 1/4" BSP Weight: 2.37 lbs. (1.08 kgs)
- Professional Heavy Duty 6" Dual-Action Air Palm Sander with PSA Backing Pad
- Heavy Duty Ball Bearing Construction for Vibration Free Performance
- Professional Sander with Unique Ergonomic Design
- Low Vibration for Swirl-Free Finishes
- Built-in Regulator for Complete Speed Control
Ingersoll Rand 6" Air Random Orbit Sander 300G
Variable Speed. Produces swirl-free finish. Lightweight, low vibration composite design. Contoured grip. Specs: Air Consumption (CFM):16; CFM at Load: 15.5; Speed (RPM): 10,000; Air Inlet Size (NPT): 1/4" ; Min. Hose Size: 5/16". Includes: 360 degree swivel vacuum adapter that provides greater range of movement without tangled hoses and cords.
- Composite design - weighs less than 2 pound
- Diffused rear exhaust
- 3/16-Inch Orbit
- Contoured grip
Astro 300SP 6-Inch DAQ Random Orbital Sander with Pad - Regular Duty, 9,000rpm
The Astro Pneumatic 300SP 6" DAQ Random Orbital Sander with Pad - Regular Duty - 9,000rpm DAQ - Dual Action, Quiet Performance. Used for feather edging, metal preparation and finish work on body filler. Built-in silencer and motor insulation provides quiet operation. Balanced ball bearing construction for vibration-free performance. Built-in regulator for positive speed control. Specifications: Disc Size: 6", Free Speed: 9,000rpm, Orbit: 3/8"(9.5mm) Orbit Stroke, Overall Length: 9-1/2" (241mm), Net Weight: 4-1/4lbs. (1.92kg), Spindle Thread Size: 5/16"-24, Air Inlet Thread NPT: 1/4", Air Hose I.D. Size: 3/8" (10mm), Avg. Air Consumption: 5cfm, Air Pressure: 90-120psi.
- DAQ - Dual Action, Quiet Performance. Used for feather edging, metal preparation and finish work on body filler
- Built-in silencer and motor insulation provides quiet operation
- Balanced ball bearing construction for vibration-free performance
- Built-in regulator for positive speed control
- Walking work shoes
- Drugstore acne cleanser
- Ethernet hubs best buy
- Undereye setting powder for dry skin
- Luxury all inclusive resorts
- Bass fishing rod and reel combo