Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift
Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift
Dragway Tools 2 Ton Folding Engine Hoist Cherry Picker Shop Crane. No need to rent one from a store or constantly uses your buddies when you have your own. Feel Confident that this Premium tool will last for many years to come.
- (6) Fully Rotating 3" Steel Caster Wheels Easily allow you to move this hoist in any direction for increased maneuvering
- Folded Dimensions: 58" x 37" x 22" so you can Store it in the corner and save space
- Working Dimensions: 65" x 41" x 37"
- Boom Range: Floor - 102"
- 3" x 3" Square Tube Legs (.125" Thick Steel)
- Vertical Mast: Premium Steel (.3125" or 5/16") Thick
- 4000 LB closed boom capacity and (48" inches maximum height)
- 1000 lb extended boom capacity and (102" inches maximum height)
- 8 Ton Hydraulic Ram
- 12" Forged Steel Chain and 5/16" Hook
- Packaged in 2 boxes and normally shipped via UPS
- Full 1 Year Warranty
- Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift
- (6) Fully Rotating 3" Steel Caster Wheels Easily allow you to move this hoist in any direction
- Working Dimensions: 65in x 41in x 37in
- 12in. Forged Steel Chain and 5/16in. Hook
- Boom Range: Floor - 102in.
Best Choice Products Engine Stand 1000lb Pro Stand Hoist Lift Automotive Tools Shop Equipment New
Best Choice Products SKY359 Engine 1000 lb. Pro Stand Hoist Lift Automotive Tools Shop Equipment New
- Supports up to 1000lb engine
- Rolling casters for easy mobility in the garage
- Perfect for storing or working on small blocks
- Dimensions: 30" (L) x 27.75" (W) x 34" (Height to Handle)
Goplus 2 TON Engine Hoist Cherry Picker Shop Crane Lift Black
This is our cranes if youre looking for an easy to store unit. This will lift almost any gas engine and some smaller diesel engines. Useful for moving heavy parts such as axles, transmissions and transfer cases around the shop.
360 Degree Rotating Wheels
Low 4 clearance gets under more cars without requiring jacking up of the vehicle
3-1/2 Casters and 4 Front Wheels
Push handle with rubber grips for ease of maneuverability
4000 lb closed boom capacity
1000 lb extended boom capacity4 Position boom
Heavy duty, slow release
Packaged in 3 boxes
Heavy gauge structural steel
4 adjustable positions: 0.5Ton ,1Ton ,1.5Ton 2 Ton
Dimensions (installed):65"x38 1/2"x60"(LxWxH)
Max. Lifting height (with min. Boom extension):88 4/5"
Max. Lifting height (max. Boom extension):105"
Boom height :1450mm to 2300mm
Base size (extended-closed):460x850-1550x850
Ram capacity: 8 ton
Boom extends from 41 4/5" to 63"
- Heavy Gauge Structural SteelThis engine hoist is made of heavy duty structural steel, durable and sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity and 1000 lb extended boom capacity.
- Adjustable Positions and Easy StorageThere are 4 adjustable positions for your different work needs: 0.5Ton ,1Ton ,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
- 360 Swiveling WheelsThere are six durable wheels on the lift, which can be rolled around and swung in any direction. It provides maximum maneuverability and it is a good choice for moving heavy parts.
- Useful LiftThis lift could lift almost any gas engine and some smaller diesel engines. Useful for moving heavy parts such as axles, transmissions and transfer cases around the shop.
- Powder Coated FinishIt is painted with glossy corrosion-resistant and anti-rust paint, which can be used both indoors and outdoors. With this feature, it is also very easy for you to clean.
OrionMotorTech 2 Ton (4000lbs) Engine Hoist/Shop Crane/Cherry Picker Load Leveler Chains
Engine hoist, shop crane, cherry picker - capability under 4000 lbs
Durable high grade steel
Heavy duty & high capability
Extended chains & more flexible
Package dimensions: 22.83" x 2.36" x 9.45"
Package weight: 13.33 lbs
Item dimensions: 21" (L) x 8" (H) x 2" (W) with handle
Weight capacity: 2 tons/4000lbs
1 x engine hoist leveler
- PREMIUM QUALITY, made of high grade steel, safe and durable
- HEAVY DUTY, balance heavy & massy loads up to 2 tons/4000 lbs
- EASY TO USE, simply crank the threaded shaft to balance the load
- COMPACT SIZE, measures 21" (L) x 8" (H) x 2" (W) with handle, longer chains
- PERFECT for installing & removing engines, transmissions or shop equipment
Tough Hook TH-Grey Heavy Duty Hanger, Color, Grey
The Tough Hook hanger is specially designed to hang, hold and carry heavy equipment, easily supporting over 150 lbs. Designed by an us Army sergeant, the Tough Hook is purpose built to hang, store and carry heavy equipment. Tough Hook uniquely designed to fit the needs of individuals & companies who rely on a heavy duty hanger on a daily basis, and serves to extend the functional lifespan of that equipment.
- Heavy duty multi-purpose hanger
- Patented grip handle, for easy transportation of heavy equipment
- I-beam construction and impact resistant Resin make it nearly indestructible. 150lb load capacity
- Tough Hook is proudly manufactured in the USA
- Backed with a 100 Lifetime Warranty
Premium Thick Steel 2 Ton Load Leveler with Chain for Cherry Picker Crane Jack Lift Engine Hoist Shop Power Tool Balance the Load Up to 4000 Lbs Easy Install Heavy Duty Compact Size Weight 13 lbs
Easily install and remove an engine, transmission or shop equipment by yourself with this 2 Ton Load Leveler for Engine Hoist Shop Crane Cherry Picker Jack Lift 4000 Lbs
- Balance heavy awkward loads up to 4000 lbs
- Simply crank the threaded shaft to balance the load
- Measures 23" (Length) x 8" (Height) x 2" (Width) with Handle, Includes 2 x 14 Inch Chains
- Works with engine hoists, shop cranes and cherry pickers.
- Made from Premium .375 (3/8) Thick Steel
Partsam 880 lbs Lift Electric Hoist Crane Remote Control Power System, Zinc-Plated Steel Wire Overhead Crane Garage Ceiling Pulley Winch w/Premium Straps (UL/CUL Approval, w/Emergency Stop Switch)
Zinc-plated Steel Wire, Durable Use!
Voltage: 110/120V/60Hz; Watt: 850W; Ampage: 7.1A
Handy and Convenient Remote Button!
Red Butoon is emergency stop switch. For Black Button, pressing upside is going up, converly going down.
For safty reason, the hook maybe a little tense, please take if off carefully.
Spend almost the same, but Free Your Hands!
Not much more expensive than a manual hoist, works great but STOPPED you can squeeze the ropes together with your hand to micro move the load for assembly/disassembly work.
FREE Lift Slings Included, Lift Whatever You Want!
Longer 2" x 6' and shorter 36" x 2" Lift Sling Straps are Included, FREE gifts just to make your job done easier.
One 440lbs Electric Hoist
One 2" x 6' 2 Ply Lift Sling Strap (Longer one)
One 36" x 2" 2 Ply Lift Sling Strap (Longer one)
1 Can be install horizontally or vertically
2 Not waterproof, can be only used indoors.
3 There is no wireless remote at present.
4 Does it reverse at the same speed for lowering - Yes, same up as down. Not so fast either direction to ensure the safety.
5 If I am using this to life a jeep top do I need anything other than what comes with the lift? - You will probably need a sling. I would check jeeps web sites for others that made there own slings. I found mine on a Porsche site but was custom fit for rhe top.
6 My hoist will not turn on. Is there a fuse or something? It is new. Can the stop button get stuck? - Stop button probably stuck. It comes with the panic button activated (red knob) twist to release and it will pop put.
7 Does the lift automatically shut off when it reaches its maximum height? - Yes.
- Tips PARTSam is the ONLY authorized seller of Partsam products.If you receive a product that does not arrive branded PARTSam on or not in a PARTSam packaging with logo, please contact that seller for a refund as it is a counterfeit PARTSam product.
- Lifting Weight: 440lb.(Single-line), 880lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line)
- Rated Volt: 110/120V 60Hz ; Rated Current: 7.1A ; Input Power: 850W ; Horsepower: 1.139 hp
- Diameter of wire rope: 0.15inch ; Tensile strength of wire rope 1770N/mm2
- VERSATILE USE: Partsam electric hoist winch can be used to lift regular or irregular shape things as stones, trees, mower, engine, truck top cover ect. vertically or horizontally in garage, ceilings, loft, barn, attic anywhere and anytime you can imagine, and is a "must" in Christmas for lifting all kinds of heavy things. FREE Lift Slings are included to make your job easier.PARTSam Electric Hoist Runs with Emergency Stop Switch, the Red Button Works for that
Goplus Engine Stand Motor Hoist Auto Car Truck Automotive Jack (2000-lb Capacity)
This is our 2000 LB engine stand automotive performance dolly mover. It is made of heavy duty all steel construction. And a reinforced steel neck provide ample strength and eliminate flexing when supporting an engine block up to 2000 lb. A wide base prevents tipping, yet the foldable engine stand quickly folds up for convenient storage. Rear swivel casters provide maneuverability and a 360 degree rotating mounting head provides easy access to any part of the engine.
Weight Capacity: 2000 lbs
Size of the hanger: 9.5 x 5.5x 5.5 inch
Diameter of back casters: 3 inch
Diameter of front casters: 3.5 inches
- Large Capacity & UniversalThe max weight capacity of this engine stand is up to 2000 pounds. And its reinforced steel neck provides strength and eliminate flexing when supporting an engine block up to 2000 lb.
- Anti-rust and Anti-corrosionThis engine stand coated red and black finish on surface, which makes it anti-rust and anti-corrosion, and meanwhile ensures its long service lifespan.
- 360 Degree Rotation & Flexible MobilitySix heavy duty casters not only make the engine stand flexible and stable, but also offer stability. And 360 degree rotation allows for easy mounting.
- Folding DesignThe engine stand has foldable design. This design makes it not only space saving but also portable to carry.
- Simple Assembly & Easy to CleanThe instructions are simple and you can finish the assembly in a few steps without anyone's help. What's more, a smooth surface makes it easier to clean.
Grizzly G0704 Drill Mill with Stand
This great little machine sports some of the same features found on much larger mill/drills: dovetail column, variable speed 1 HP motor, R-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16" x 26-5/8" table and it comes with its own stand! This is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop! Features: Dovetail column Safety shut off switch Spindle speed DRO Fine feed head control 2-Speed gearbox Clear guard on spindle Rubber chip guards on ways Zero setting dials Dials read inches Forward/Reverse switch Stand with chip tray and cabinet measures 16" L x 16" W x 31" H Specifications: Motor: 1 HP, 110V, 12A, single-phase Spindle taper: R-8 Spindle travel: 2" T-slots: 3 @ 2-1/2" centers, 7/16" wide Head travel: 11" Head tilt: 90 L/R Max. distance spindle to table: 13" Swing: 15" Table travel (longitudinal): 18-7/8" Table travel (cross): 6-7/8" Table size: 7-1/16" x 26-5/8" Spindle Speed: 50-2250 RPM Approximate shipping weight: 362 lbs.
- Item may ship in more than one box and may arrive separately
- This great little machine sports some of the same features found on much larger mill/drills: dovetail column variable speed 1 HP motor R-8 spindle
- 2A single-phase Spindle taper: R-8 Spindle travel: 2-Inch T-slots: 3 @ 2-1/2-Inch centers 1/2-Inch wide
- Distance spindle to table: 13-Inch Swing: 15-Inch Table travel: 18-7/8-Inch Table travel : 6-7/8-Inch
Mallofusa Outboard Motor Stand Boat Carrier, 320LB Capacity Dolly Storage Cart, Heavy Duty with 360 Swivel Caster Wheels
Mallofusa Motor Cart Dolly,which is ideal to Service, maintain, and store your boat motor. It features four 8" rear tires, two 3" front casters and holding up to 320 lbs.The ergonomic handles making it easy to cart outboard motors in the garage or shop.
Max Weight Capacity: 320 lbs
Rubber tire 8"
Caster Size 3"
Steel tube frame 1"
Folds: 72" x 14" x 2"
Size: 72" L x 29" W
Board Dimension:19 1/5" (W) x 7 1/2" (H) x 1 3/5" (thikness)
Overall Dimension: 27 1/2" (W) x 43" (D) x 42" (H)
G.W.: 34.9 Lb
- MULTI PURPORSED: Our durable outboard motor carrier is suitable for service, maintaining and storing boat motor. Ideal for storage in the garage or maintenance & repairs in the Shop.
- DURABILITY WITH SOLID STELL CONSTRUCTION: Side by Side Rear Tires Construction. Tubes are distortion-free. And it is heavy duty so that could hold weight up to 320Lbs
- FOUR WHEELS DESIGN WITH TWO 360 SWIVEL CASTER WHEELS: Features with four 8" rear wheels and two 3" universal caster wheels for convenient transport, easily moved from room to room.
- EASY HANDLE: Designed with ergonomic & Anti Slid Rubber Handles make it Easier, Safer to Cart Outboard Motors in the Shop or Garage.
- POWDER COATED FINISH: This motor carrier is antirust and waterproof due to its powder coated finish. It could effectively protect the product from rust and prolong its lifespan.
- Food saver machine
- Male swim trunks
- Messenger bag women
- Bread boxes
- High end full coverage foundation for oily skin
- Liquid weed killer for lawns