Hanperal 50mm SDS Plus Shank Hole Saw Cutter, Wall Hole Saw Drill Bit for Brick Concrete Cement Stone
Material: carbide tipped metal
Color: As the picture shows
Wrench Size : 50mm
Connecting Rod size: 200mm
1x long connecting rods
1x 1.18" drill bit
1x 1.57" drill bit
1 x 1.96 drill bit
1x Center positioning guide
1x positioning drill screw
1. At the trepanning, please wear good protective measures, in case of wood chips splash damage eyes.
2.In order to the locking screw more stable on the drill and for your sefety, please as the clockwise to use it when you drill the wall holes, thank you.
3. Due to the sizes by the manual measurement, there may has a little errors between 1-3mm, please do not mind it before you purchase it, thank you!
- -Simple operation, easy to use and fast perforated.
- -This item is made of high quality carbide tipped metal material, durable.
- -The SDS Plus Shank Carbide Tip Hole Saw Drill Bit suitable for drilling walls, stones, bricks or installation of air-conditioning etc, Oil Fume Exhauster and Sewer Pipeline Hole Open ect.
- -Using the Electric Hammer of the impact and rotation function on the wall, hollow brick to operate air conditioning holes, pipe holes and so on.
- -High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth, precision engage, appearance.
YaeTek 30 40 50mm SDS Plus Shank Carbide Tip Hole Saw Drill Bit Shaft Cutter Wall Drill Brick Stone Concrete Cement with Wrench
-Made of high quality metal material and with carbide tipped.
-Rounds alloy blade combinations, each blade to bear part of the workload, not prone to chipping off the edge
-High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth, precision engage, appearance.
3 x Carbide Tip Hole Saw
1 x Long Shaft
1 x Drill Bit
1 x Wrench
Please allow 1-3cm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same
- Carbide Tip Hole Saw: 30/40/50mm
- Long Shaft size: approx. 350mm
- Drill bit length: approx. 110mm
- Material: metal
- Suitable For: brick, concrete walls, air conditioning openings
Moslion Basketball Blanket Sport Basketball Embedded in A Brick Wall Hole Throw Blanket Flannel Home Decorative Soft Cozy Blankets 60x80 Inch for Adults Kids Sofa Orange Grey
Moslion Basketball Blanket Sport Basketball Embedded in A Brick Wall Hole Throw Blanket Flannel Home Decorative Soft Cozy Blankets 60*80 Inch for Adults Kids Sofa Orange GreyBrand: MoslionPackage: 1 Pcs Throw BlanketDesigns:Vibrant printing. Print Only on Front Side
Why Buy From USOur Fluffy Throw Blankets are made of high-quality flannel-smooth, soft and warm. It has very good permeability and is easy to wash, machine washable and dry-able. So besides using it in winter, you can still use it in summer in air-conditioned room. Our fleece blankets are anti-pilling anti-shed fastness shrink resistant. It is a very great gift for any occasion-on the couch or sofa, in the car, on bed, travel or outdoor activities. It is suitable for all-aged people, adults baby boys girls young men women seniors. The vibrant printing makes the throw blanket a very good decoration.
So Just Click Add to Cart to take this cozy blanket home and enjoy a warm Christmas and New Year!
- 1. Size: 60*80 Inch (150*200 cm)
- 2. They are Reversible plush blanket. This Fluffy Blanket gives you soft and warm feeling in cold winter in office or at home
- 3. This Basketball throw blanket is made of high-quality Flannel, very smooth and cozy. Besides, it won't shed, pilling, color-fading and shrink
- 4. Only printed on the Front Side. Colorful and vibrant printing-Fastness. Best decoration for bed chair sofa. Wonderful gift for children elderly friends family colleagues.
- 5. Multiple Uses-this warm blanket is suitable when watching TV, reading on a coach, napping in office lounging chair or bed or outdoor concerts, sporting events and camping. Or use it as a throw over your bed and couch. Even when the summer comes, you can still use it in air-conditioned room.
5Pcs Multi-Material Drill Bit Set, LittleSmith Ceramic Drill Bits Masonry Drill Bits with Surface Coating Process, Drilling in Concrete, Brick, Glass, Masonry, Tile and Wood, 6-12mm (1/4", 5/16", 3/8"
The multi material drill bit not only has the function of the ordinary ceramic glass drill ,
but also has the function of the electric hammer bit, and drilling the hole on the cement bearing wall. In particular,
it solves the problem that the ordinary drill bit is easy to break when it touches the large stone in the wall.
Product Name: Multi-material Drill Bit Set
Material: High quality tungsten steel alloy
Color: Black & Silver
Shank: 3-flats shank
Application: Multi-material Drill Bit can used on tiles, ceramics, concrete, glass, masonry and wood.
2x 6mm (1/4" )
1x 8mm (5/16")
High quality cemented carbide has reinforced head to prevent drill cracking and prolong service life.
The Multi-material Drill Bit chip is smoother and more precise, making it more durable.
The whole bit is designed to meet the needs of professional or self drilling.
One Multi-material Drill Bit replaces two drill bits (1x glass & tile drill bit 1x Mansonry drill bit), ideal for drilling faster holes in bathroom tiles, or wall mirrors.
Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
Special Note When Using the Multi-material Drill Bit
Do not use impact mode of drills or hammers when use the Multi-material Drill Bit.
The drilling speed of the Multi-material Drill Bit should be slow, especially in the beginning of drilling.
Please try to keep the drill vertical and use WATER or COOLANT for lubrication when drilling.
After-Sales Service of LittleSmith
Quickly customer service feedback within 24 hours.
Quality problems within 90 days can not be used, will Full refund or Free replacement.
- HIGH QUALITY ALLOY CUTTING HEAD: the drill bit is made of cemented carbide, and its hardness is higher than the ordinary drill bit. The cutting resistance is small and the drilling EFFICIENCY is high.
- U-TYPE DRILL BODY : drill has been slotted, the surface of the drill body is clean and NO burr, the paint is treated to prevent rust, and the chip removal is more smooth.
- ANTI-SKID TRIANGULAR HANDLE: a unique triangular shape of the handle, so that the drill can be tightened and not slipped.
- OPENING NEAT-SMOOTH: no broken edge, no tremor phenomenon, incision resistance is small AND the hole speed is very fast, easy chip evacuation and so on .It's easy to decorate after drilling the hole.
- high temperature quenching: high HARDNESS, more DURABLE and LONGER SERVICE LIFE.
Brick Clips for Hanging, Wall Pictures Wreath Lights Hanger Metal Hooks Fastener 5 Pack - Fits Brick 2-1/4" to 2-1/2" in Height
With the Brick Wall Clip Fastener you simply clip it on the brick and hang your object. There is no damage to the brick or mortar. If you need to reposition your object you simply remove the Brick Clip Fastener and clip it on a different position.
Brick must stand at least 1/8" from mortar joint for a secure fit. Place the spring edge of the clip at the base of the brick.Push the clip upward until the upper teeth of the clip grip the top of the brick. It may be necessary to use a screwdriver. Push the clip securely flush against the brick.
WHAT DO I DO IF MY MORTAR IS FLUSH WITH THE BRICK?
You need to have at least 1/8" of the brick showing to allow the Brick Clip Fastener to clip on the brick. This is referred to as having a recessed mortar joint. If your mortar is flush or even with the brick our product has nothing to grab around.
Several enterprising users have said that they chip a little mortar off the top and bottom of the brick so that the Brick Clamp can be used.
This method is much less noticeable than a big nail hole or a hole drilled for an anchor.
Brand Name: Audend
Item Weight: 0.5 ounces
Product Dimensions: 2 3/4 x 1 1/2 x 3/8 inches
Material Type: metal
Size: 5 Pack
Manufacturer Part Number: Audend-01
Shipping Weight: 3 ounces
Measured your bricks and makesure it was within the guidelines
- NO HOLES TO DRILL no damage to brick or mortar.Use to hang garlands, lights, stockings, decorations etc on brick walls and chimneys indoors and out. The attractive antique metal finish will look great on any color brick.
- EASILY CLIP ON AND OFFThe brick hangers install in seconds by clipping directly to the brick. it can be used in different locations and clipped on and off as many times as you would like.
- SUPPORTS UP TO 25 lbs per clip Made of strong tempered spring steel. These clips will support items weighing up to 25 pounds which is much more weight than most picture frames or craft items. For large paintings, multiple Brick Clip Fasteners can be used to help distribute the weight of the object.
- For use on bricks 2-1/4" to 2-1/2" high. This is the STANDARD SIZE Brick made in the United States. Our company recommended that the brick has at least 1/8" of exposed brick for a secure fit.
- 100 satisfaction guaranteed, 100 money refund, No questions asked and no hassles.
Bosch T3913SC 1-9/16 In. SDS-plus SPEEDCORE Thin-wall Core Bit
High-grade tungsten carbide offers durability and life. Ejector hole delivers easy core removal of masonry, brick and block. Works with Bosch one-piece SDS-plus pilot bits and extensions.
- High-grade tungsten carbide teeth
- Pilot bit is integrated with mandrel
- Ejector hole
- Works with Bosch SPEEDCORE SDS-plus pilot bits and extensions
- Designed for drilling with smaller hammers
TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Ultimate Tensile and Shear Strength Values
|Media||Drill Diameter||Bolt Description||Ultimate Tensile Strength||Ultimate Shear Strength|
|1/2" Drywall||1/2"||1/4"-20 UNC zinc-plated steel||265 lb.||241 lb.|
|5/8" Drywall||1/2"||1/4"-20 UNC zinc-plated steel||356 lb.||324 lb.|
|1/2" Drywall with 25 Gauge Stud*||1/2"||1/4"-20 UNC zinc-plated steel||425 lb.||Not available|
|5/8" Drywall with 25 Gauge Stud*||1/2"||1/4"-20 UNC zinc-plated steel||464 lb.||Not available|
|Concrete Block||1/2"||1/4"-20 UNC zinc-plated steel||1,080 lb.||Not available|
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
- Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material
- Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
- Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
- Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Innovative Soft Kids Knee and Elbow Pads with Bike Gloves Toddler Protective Gear Set w/Mesh Bag Roller-Skating, Skateboard, Bike for Children Boys Girls (Graffiti Brick Wall, Medium (4-8 Years))
Here's How You Can Make Sure That Your Little Adventurer Is Safe While Skating, Rollerblading Or Cycling
Is your little skater always coming home with bruised knees and elbows? Do you want to make sure that your toddler is safe while learning how to ride a bike? Are you looking for an affordable kids protective gear set?
Introducing The Ultimate Children's Knee, Elbow and Bike Gloves Protective Set By Simply Kids
Now you can rest assured that your toddler is safe while enjoying his/her outdoor activities thanks to our sturdy, adjustable and safe protective gear set for kids ages two to eight, which includes everything your child needs.
Here's What You Get:
TWO Knee Pads For Kids
TWO Elbow Pads
TWO BONUS Bike Gloves For Kids
ONE Convenient Mesh Bag
ONE Ultra-Fun Sticker
Why Choose Our Skateboard Pads For Kids?
Our BMX pads are:
SAFER thanks to the revolutionary 3-Layer Soft-Padded design. 3-Layer design is using a 0.8cm EVA buffer material and 2 x 0.6cm neoprene buffer material to absorb any impact; Soft-Padded design can prevent the floor to scrape up your kids' knees and arms.
MORE COMFORTABLE thanks to the skin-friendly and lightweight Neoprene material.
SUPER BREATHABLE because the convenient air flow holes in the Neoprene material will enhance air circulation and maximize comfort.
HASSLE-FREE since they are washable and odor-resistant.
MORE FLEXIBLE, which will increase range of motion and fit knees and arms perfectly.
The Best Part?
Our multi-sport toddler girl and boy knee pads set is ideal for rollerblading, skateboarding, mountain biking, BMX biking, cycling and any other outdoor activity.
Click "Add To Cart" NOW And Ensure That Your Child Is Safe During Any Outdoor Activity
- 🛡𝗠𝗔𝗞𝗘 𝗦𝗨𝗥𝗘 𝗧𝗛𝗔𝗧 𝗬𝗢𝗨𝗥 𝗞𝗜𝗗 𝗜𝗦 𝗦𝗔𝗙𝗘 𝗪𝗜𝗧𝗛 𝗧𝗛𝗘 𝗨𝗟𝗧𝗜𝗠𝗔𝗧𝗘 𝗣𝗥𝗢𝗧𝗘𝗖𝗧𝗜𝗩𝗘 𝗦𝗘𝗧 that includes 2 x soft-padded knee pads for kids, 2 x soft-pad children's elbow pads and 2 x BONUS bike gloves for toddlers with mesh bag and cute stickers! Now your child can safely enjoy any outdoor activity and you can have that much-needed peace of mind!
- 𝗜𝗡𝗡𝗢𝗩𝗔𝗧𝗜𝗩𝗘 𝟯 𝗟𝗔𝗬𝗘𝗥 𝗦𝗢𝗙𝗧-𝗣𝗔𝗗 𝗗𝗘𝗦𝗜𝗚𝗡 𝗠𝗔𝗞𝗘 𝗜𝗧 𝗦𝗔𝗙𝗘𝗥, 𝗦𝗧𝗨𝗥𝗗𝗜𝗘𝗥 & 𝗠𝗢𝗥𝗘 𝗗𝗨𝗥𝗔𝗕𝗟𝗘! The Simply Kids premium pads are made using 3 layers of heavy-duty buffer materials to absorb any impact of falling down! Plus, the revolutionary soft-pad technology will fit kids' knees and arms perfectly while increasing the range of motion. Our only goal is to keep your children safe while they're enjoying their favorite outdoor activities!
- 😁𝗬𝗢𝗨𝗥 𝗧𝗢𝗗𝗗𝗟𝗘𝗥 𝗪𝗜𝗟𝗟 𝗟𝗢𝗩𝗘 𝗪𝗘𝗔𝗥𝗜𝗡𝗚 𝗢𝗨𝗥 𝗦𝗞𝗔𝗧𝗘𝗕𝗢𝗔𝗥𝗗 𝗣𝗔𝗗𝗦, since they are not only durable and washable, but also extremely flexible and breathable. The skin-friendly material will prevent discomfort while the lightweight construction will make sure that you kid can comfortably wear the knee and elbow pads for hours!
- 𝗢𝗡𝗘 𝗖𝗛𝗜𝗟𝗗𝗥𝗘𝗡'𝗦 𝗣𝗥𝗢𝗧𝗘𝗖𝗧𝗜𝗩𝗘 𝗚𝗘𝗔𝗥 𝗦𝗘𝗧 𝗙𝗢𝗥 𝗔𝗟𝗟 𝗢𝗨𝗧𝗗𝗢𝗢𝗥 𝗔𝗖𝗧𝗜𝗩𝗜𝗧𝗜𝗘𝗦! Our knee pads kit is ideal for skateboarding, mountain biking, BMX biking, rollerblading or cycling. Available in multiple colors and designs, our bicycle pads set has passed the 𝘾𝙋𝙎𝙄𝘼 (Consumer Product Safety Improvement Act) Testing and is perfect for both boys and girls!
- 👌𝗪𝗔𝗡𝗧 𝗠𝗢𝗥𝗘 𝗣𝗘𝗔𝗖𝗘 𝗢𝗙 𝗠𝗜𝗡𝗗? 𝗪𝗘 𝗢𝗙𝗙𝗘𝗥 𝗬𝗢𝗨 𝗔𝗡 𝗘𝗫𝗖𝗟𝗨𝗦𝗜𝗩𝗘 𝟭-𝗬𝗘𝗔𝗥 𝗪𝗔𝗥𝗥𝗔𝗡𝗧𝗬! That's right! If you or your little skater are not 100 thrilled with our mountain bike pads set within 1 year, we promise to send you a replacement or a full refund on the spot! No questions asked! What are you waiting for?
Bosch HDG214 2-1/4 In. Diamond Hole Saw
Fast and easy starts, even in the hardest materials like porcelain and granite. Quick Change universal hole saw system allows change to any size or type of hole saw in seconds. For use only with machines designed for wet sawing and on a GFCI-protected circuit.
- Vacuum-brazed diamond grit cuts faster and lasts longer
- Segmented teeth reduce debris and heat
- Remove material plugs quickly, easily
- One-inch maximum cutting depth
PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray
PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray
- Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry
- High-tack paste resists moisture for application in damp environments and can be used in vertical applications
- Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to 115 degrees F
- Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)
- Meets ASTM C881-99
- How to drill large holes in wood
- Canister vacuum under 100
- Movie maker alternative
- Riding lawn mower for steep slopes
- Chair pads
- App for baby